Firestone Pond Liners and Seaming Products

A 6" diameter circular patch with adhesive backing for quick repair of small cuts and punctures.

A rubber based sealant used to seam exposed membrane edges to provide additional waterproofing protection. It can also be used as a quick applied sealant to repair punctures to PondGard membrane. 11 oz. tube seals approximately 20 lineal feet and is applied using a standard caulking gun. Advanced formula has better water proofing capabilities

A complete system for seaming together panels of PondGard Liner in order to form large membrane panels suitable for installation in large ponds. Each carton contains: 1 pint Seam Prep, 25 lineal feet QuickSeam Splice Tape, QuickSeam Application Tool (handle and pads), Complete Installation Instructions, Crayon, Roller and Wipes.

Use this 2-sided tape to join two pieces of EPDM liner together. Available in 3" or 7" wide rolls. For maximum sealing use cover strip in conjunction with this tape.

If your pond liner has a minor tear, fix it quickly and easily using the Firestone EPDM Liner Repair Kit.

This kit contains all you need to quickly and easily repair minor damages to your liner. Two 6" x 6" patches, QuickPrime Adhesive, a scrubber pad, a roller, and a pair of disposable gloves comprise the kit.

For optimum performance of the patches, drain the water from the damaged area and allow it to dry completely. Apply the QuickPrime onto the damaged area and the patch with the scrubber pad, being sure to wear the protective gloves. Wait until the QuickPrime becomes tacky, pull the backing from the patch, cover the damaged area, and use the wooden roller to flatten the patch. Ensure that the repaired area is completely dry before refilling your pond with water.

The Firestone EPDM Liner Repair Kit will help you maintain a beautiful and healthy pond season after season.
Made in the USA.